Ensilage (silage making) is an anaerobic fermentation process that takes place when proper temperature and moisture conditions are maintained within the pit. Silage making offers the following benefits:
(1) Reserves feed supplies for utilization during scarcity periods such as the winter-spring season or flooding, ensuring a proactive year-round feed supply for dairy cows.
(2) Utilizes agricultural by-products (e.g., corn stover after harvesting ears, peanut vines) for cattle feeding, yielding high economic efficiency.
The ensilage technique involves harvesting forage crops at the optimal stage, chopping them into small pieces, compacting them into the pit, and sealing the pit with soil to prevent rainwater and air penetration. Forage corn, corn stover after harvesting mature or baby corn, sugarcane tops, natural or cultivated grasses, peanut vines and leaves, pineapple pulp, etc., can all be preserved through ensilage.
Essential conditions for successful ensilage:
Standardized pit construction: The pit must be sturdy, with firm walls and floor to prevent external water seepage. It should be clean and smooth to allow thorough and easy compaction. Once fully packed, the pit must be sealed with soil and carefully covered to keep out rain and air.
High-quality raw materials: Feed ingredients must be fresh, free from rot or mold. Crops rich in water-soluble carbohydrates (like potatoes or sweet potatoes) ferment easily without added molasses. Materials with lower sugar content require molasses supplementation to facilitate fermentation.
Optimal moisture level: Ensure the material reaches approximately 65-70% moisture content prior to packing. If moisture exceeds this range, wilt the crop briefly in the sun. If the material is overly dry or mature, sprinkle water (or diluted molasses) to achieve the required moisture level.
Weather contingency: In case of unfavorable weather preventing wilting, mix chopped dry straw or bagasse thoroughly with the fresh forage (grass or fodder corn) to reduce moisture before ensiling.
Rapid processing: Complete the filling and sealing operations as quickly as possible—ideally within a single day from harvest to final pit closure.
Thorough compaction: Pack the mass tightly into the pit by laying thin layers successively and compacting each layer thoroughly as it is added. Pay special attention to compressing the entire surface, edges, and corners of the pit.
Source: 71 Questions and Answers on Dairy Cattle Farming






